Konica Minolta Import and Export Function Use Software Switch 24 Hex 2 ...

To enable consumable life of devices : Software Switch 227 Hex 00 Software Switch 230 Hex 00...

Konica Software Switch Settings (8 series)01020304050607080910...

Even if the remaining amount of toner is sufficient, machine detects toner near empty. [ERBJKS1500858021,IQBF__1500859199]If toner near empty is misdetected, clear the toner information and manually initialize by following p...

SW 153- HEX 40 old color reproduction- HEX 00 new color reproduction (default)...

When this occurs images that contain Magenta shows white spots and the entire sheet has specks of Magenta toner on the sheet. To resolve adjust the Charge AC Output fine adjustment Vpp-m to 6. Additionally run the calibration. Before A...

Off white haze on prints use back ground removal set to 3-5. In service mode image adjustments....

Update procedure of MFP Controller Boot Program 1. Connect the USB memory stick containing the firmware (G00-N4 or later) into the USB port on the right side of the control panel.2. Turn the main power switch ...

1.7.6. Paper Separation Adjustment Adjust to -1mm By changing the period between the activation of the registration roller and the 2nd image transfer out...

I.7.3. Density Balance Adjust To adjust the density balance of the main scanning direction by scanning the output test pattern. The correction value adjusted by this function is applied to the f...

I.7.1. Gradation Adjust To make an automatic adjustment of gradation based on the test pattern produced and the readings taken by the scanner. Gradation or density reproduction performance becom...

Transfer Voltage Fine Adjustment in Konica Minolta To improve print quality on Konica Minolta devices Adjusting the Transfer Voltage is an effective method. This adjustment can be divided into two main sections: Increasin...