1.7.6. Paper Separation Adjustment
Adjust to -1mm
- By changing the period between the activation of the registration roller and the 2nd image transfer output, the paper separation position can be adjusted for the 1st and 2nd sides of paper.
- To ensure proper balance between paper separating and image transferring performances by varying the paper separation position applied for duplex printing in hot and humid conditions.
|
Setting item |
Setting value |
Default setting |
|---|---|---|
|
First Side, Second Side, Thin Paper Front, Thin Paper Back |
-10 mm to +10 mm (step: 0.1 mm) |
0.0 mm |
<Procedure>
- Select a setting item.
- Enter the new setting from the [+] / [-] keys.
- Priority on paper separation performance: Increase the setting value
- Priority on image transfer performance: Decrease the setting value
Touch [END] to validate the setting value. Check the print image for any image problem.
I.7.8. Removable Voltage Adjust
Adjust to -1
- To allow the basic charge neutralizing voltage to be adjusted.
- To prevent separation failure (jam, paper conveyance failure) that may occur when paper other than recommended one is used by adjusting the neutralization voltage to the one that suits the type of paper the user uses.
|
Setting item |
Setting value |
Default setting |
|---|---|---|
|
First Side, Second Side, Thin Paper Front, Thin Paper Back |
Auto |
|
|
-3 to +3 (step: 1)
|
|
<Procedure>
- Select a setting item.
- Enter the new setting from the [+] / [-] keys. Select [Auto] to automatically control the neutralization voltage without using the neutralization voltage setting value.
- To increase the neutralization voltage, increase the setting value.
- To decrease the neutralization voltage, decrease the setting value.
Use Thin Paper setting on the trays