Even if the remaining amount of toner is sufficient, machine detects toner near empty. [ERBJKS1500858021,IQBF__1500859199]
If toner near empty is misdetected, clear the toner information and manually initialize by following procedure.
Procedure
1. Call the Service Mode to the screen.
2. Call the Enhanced Security to the screen.
3. Touch [Engine FW DipSW]. (Stop -> 0 (Zero) -> C (Clear) )
4. The switch corresponding to the colors to be reset is highlighted (ON state) in reverse video.
31:Y
32:M
33:C
34:K
5. Touch [END].
6. Turn OFF and ON the main power switch.
Search Knowledge Base Articles
Toner Reset (machine detects toner near empty)
Did you find this article useful?
Related Articles
-
Konica Minolta Import and Export Function
Konica Minolta Import and Export Function Use Software Switch 24 Hex 2 ... -
Enable Consumables on Konica Devices
To enable consumable life of devices : Software Switch 227 Hex 00 Software Switch 230 Hex 00... -
Konica Software Switch Settings (8 series) Work In Progress
Konica Software Switch Settings (8 series)010203040506070809101112 Addition of Authentication Device... -
Boot Rom Update
Update procedure of MFP Controller Boot Program 1. Connect the USB memory stick containing the firm... -
New Color Reproduction on iseries
SW 153- HEX 40 old color reproduction- HEX 00 new color reproduction (default)...